
Technical Documents
Specifications
Brand
DuracellProduct Type
Button Battery
Battery Size
PR70
Chemistry
Zinc Air
Nominal Voltage
1.4V
Battery Capacity
95mAh
Diameter
5.8mm
Number of Batteries
6
Termination Type
Flat
Height
3.6mm
Weight
300mg
Standards/Approvals
ANSI, IEC
IEC Code
PR70
Series
Duracell EasyTab
Product Details
This button battery supplies low-voltage power for Compact electronic devices using zinc-air chemistry. It operates within typical ambient temperatures for consumer use and is designed for applications requiring a stable 1.4V nominal output and flat termination contacts. The pack contains six cells and meets recognised ANSI and IEC standards for this size and chemistry.
Delivered capacity varies with applied load, temperature and cut-off voltage and is specified as 95mAh measured to 1.1V at a defined test condition.
The typical internal impedance is 16ohm at 1kHz which influences voltage stability during discharge and suitability for low-drain loads.
The cell measures 5.8mm diameter and 3.6mm height, with flat terminals for contact surfaces.
The recommended ambient range for operation is 0°C to 50°C.
The pack contains six batteries.
Keep button batteries out of the reach of children. Consult a doctor immediately if ingested.
Stock information temporarily unavailable.
₪ 34.29
₪ 5.715 Each (In a Pack of 6) (ex VAT)
₪ 40.12
₪ 6.687 Each (In a Pack of 6) (inc. VAT)
6
₪ 34.29
₪ 5.715 Each (In a Pack of 6) (ex VAT)
₪ 40.12
₪ 6.687 Each (In a Pack of 6) (inc. VAT)
Stock information temporarily unavailable.
6
Technical Documents
Specifications
Brand
DuracellProduct Type
Button Battery
Battery Size
PR70
Chemistry
Zinc Air
Nominal Voltage
1.4V
Battery Capacity
95mAh
Diameter
5.8mm
Number of Batteries
6
Termination Type
Flat
Height
3.6mm
Weight
300mg
Standards/Approvals
ANSI, IEC
IEC Code
PR70
Series
Duracell EasyTab
Product Details
This button battery supplies low-voltage power for Compact electronic devices using zinc-air chemistry. It operates within typical ambient temperatures for consumer use and is designed for applications requiring a stable 1.4V nominal output and flat termination contacts. The pack contains six cells and meets recognised ANSI and IEC standards for this size and chemistry.
Delivered capacity varies with applied load, temperature and cut-off voltage and is specified as 95mAh measured to 1.1V at a defined test condition.
The typical internal impedance is 16ohm at 1kHz which influences voltage stability during discharge and suitability for low-drain loads.
The cell measures 5.8mm diameter and 3.6mm height, with flat terminals for contact surfaces.
The recommended ambient range for operation is 0°C to 50°C.
The pack contains six batteries.
Keep button batteries out of the reach of children. Consult a doctor immediately if ingested.