Technical documents
Specifications
Brand
KopexNominal Size
40mm
Fitting Type
Reducer
Thread Size
M40 → M32
Material
Brass
IP Rating
IP66
Series
EX/R
Country of Origin
United Kingdom
Product details
Thread Converters
A range of Kopex brass fittings which provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. These thread converters meet the latest ATEX/IECEx standards and have them clearly marked on the main body of the product, allowing them to be seen easily once installed, a key component of the new standard.,Enlargers (/E) are used where the thread size of the female side of the device is larger than the male side.,Reducers (/R) are used where the thread size of the female side of the device is smaller than the male side.,Adapters (/TC) are used where a conversion is required between thread types e.g. Metric to PG.
Approvals
ATEX Certification. BASEEFA07 ATEX 0247X, IECEx Certification. IECEx BAS07.0090X.
Kopex Ex-System
Stock information temporarily unavailable.
Please check again later.
₪ 74.689
Each (In a Pack of 5) (ex VAT)
₪ 87.386
Each (In a Pack of 5) (inc. VAT)
5
₪ 74.689
Each (In a Pack of 5) (ex VAT)
₪ 87.386
Each (In a Pack of 5) (inc. VAT)
5
Buy in bulk
quantity | Unit price | Per Pack |
---|---|---|
5 - 45 | ₪ 74.689 | ₪ 373.44 |
50 - 245 | ₪ 72.199 | ₪ 361.00 |
250+ | ₪ 69.584 | ₪ 347.92 |
Technical documents
Specifications
Brand
KopexNominal Size
40mm
Fitting Type
Reducer
Thread Size
M40 → M32
Material
Brass
IP Rating
IP66
Series
EX/R
Country of Origin
United Kingdom
Product details
Thread Converters
A range of Kopex brass fittings which provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. These thread converters meet the latest ATEX/IECEx standards and have them clearly marked on the main body of the product, allowing them to be seen easily once installed, a key component of the new standard.,Enlargers (/E) are used where the thread size of the female side of the device is larger than the male side.,Reducers (/R) are used where the thread size of the female side of the device is smaller than the male side.,Adapters (/TC) are used where a conversion is required between thread types e.g. Metric to PG.
Approvals
ATEX Certification. BASEEFA07 ATEX 0247X, IECEx Certification. IECEx BAS07.0090X.