Kopex Enlarger, Conduit Fitting, 20mm Nominal Size, M20 → M25, Brass
Technical documents
Specifications
Brand
KopexNominal Size
20mm
Fitting Type
Enlarger
Thread Size
M20 → M25
Material
Brass
IP Rating
IP66
Series
EX/E
Country of Origin
United Kingdom
Product details
Thread Converters
A range of Kopex brass fittings which provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. These thread converters meet the latest ATEX/IECEx standards and have them clearly marked on the main body of the product, allowing them to be seen easily once installed, a key component of the new standard.,Enlargers (/E) are used where the thread size of the female side of the device is larger than the male side.,Reducers (/R) are used where the thread size of the female side of the device is smaller than the male side.,Adapters (/TC) are used where a conversion is required between thread types e.g. Metric to PG.
Approvals
ATEX Certification. BASEEFA07 ATEX 0247X, IECEx Certification. IECEx BAS07.0090X.
Kopex Ex-System
Stock information temporarily unavailable.
Please check again later.
₪ 34.275
Each (In a Pack of 5) (ex VAT)
₪ 40.102
Each (In a Pack of 5) (inc. VAT)
5
₪ 34.275
Each (In a Pack of 5) (ex VAT)
₪ 40.102
Each (In a Pack of 5) (inc. VAT)
5
Buy in bulk
| quantity | Unit price | Per Pack |
|---|---|---|
| 5 - 45 | ₪ 34.275 | ₪ 171.37 |
| 50 - 245 | ₪ 33.114 | ₪ 165.57 |
| 250+ | ₪ 31.911 | ₪ 159.56 |
Technical documents
Specifications
Brand
KopexNominal Size
20mm
Fitting Type
Enlarger
Thread Size
M20 → M25
Material
Brass
IP Rating
IP66
Series
EX/E
Country of Origin
United Kingdom
Product details
Thread Converters
A range of Kopex brass fittings which provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. These thread converters meet the latest ATEX/IECEx standards and have them clearly marked on the main body of the product, allowing them to be seen easily once installed, a key component of the new standard.,Enlargers (/E) are used where the thread size of the female side of the device is larger than the male side.,Reducers (/R) are used where the thread size of the female side of the device is smaller than the male side.,Adapters (/TC) are used where a conversion is required between thread types e.g. Metric to PG.
Approvals
ATEX Certification. BASEEFA07 ATEX 0247X, IECEx Certification. IECEx BAS07.0090X.