STMicroelectronics Motor Configuration for STSPIN230 for STM32 Nucleo

RS Stock No.: 143-8878Brand: STMicroelectronicsManufacturers Part No.: X-NUCLEO-IHM11M1
brand-logo

Technical documents

Specifications

For Use With

STM32 Nucleo

Kit Classification

Evaluation Board

Featured Device

STSPIN230

Kit Name

Motor Configuration

Product details

X-NUCLEO-IHM11M1 BLDC Motor Driver Expansion Board

The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC (BLDC) motor driver expansion board based on the STSPIN230 triple half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life.

• Operating voltage range: +1.8 to +10Vdc
• Output current: 1.3Arms
• Current control with adjustable off-time
• Standby consumption: <80nA
• Non-dissipative over-current detection and protection
• Over-temperature protection
• Interlocking function
• Hall/Encoder motor sensor connector and circuit
• 3 x Output activity LEDs
• Fault LED
• Potentiometer for manual speed control
• Screw terminals for motor signals and power supply
• ST morpho connectors for host MCU board
• Arduino Uno r3 compatible Shield headers
• Compatible with STM32 Nucleo MCU boards

Motor Controllers & Drivers, STMicroelectronics

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

₪ 119.45

Each (ex VAT)

₪ 139.76

Each (inc VAT)

STMicroelectronics Motor Configuration for STSPIN230 for STM32 Nucleo

₪ 119.45

Each (ex VAT)

₪ 139.76

Each (inc VAT)

STMicroelectronics Motor Configuration for STSPIN230 for STM32 Nucleo
Stock information temporarily unavailable.

Technical documents

Specifications

For Use With

STM32 Nucleo

Kit Classification

Evaluation Board

Featured Device

STSPIN230

Kit Name

Motor Configuration

Product details

X-NUCLEO-IHM11M1 BLDC Motor Driver Expansion Board

The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC (BLDC) motor driver expansion board based on the STSPIN230 triple half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life.

• Operating voltage range: +1.8 to +10Vdc
• Output current: 1.3Arms
• Current control with adjustable off-time
• Standby consumption: <80nA
• Non-dissipative over-current detection and protection
• Over-temperature protection
• Interlocking function
• Hall/Encoder motor sensor connector and circuit
• 3 x Output activity LEDs
• Fault LED
• Potentiometer for manual speed control
• Screw terminals for motor signals and power supply
• ST morpho connectors for host MCU board
• Arduino Uno r3 compatible Shield headers
• Compatible with STM32 Nucleo MCU boards

Motor Controllers & Drivers, STMicroelectronics