Technical documents
Specifications
Brand
SMCProduct Type
Vacuum Filter
Port Size
1/4 in
Filtration Size
3μm
Connection Thread Standard
NPT
Series
AM/AFF
Maximum Flow Rate
12000L/min
Housing Material
Die Cast Aluminium
Seal Material
Flouro Rubber
Maximum Operating Pressure
1.5 Mpa
Maximum Operating Temperature
60°C
Minimum Operating Pressure
0.1MPa
Minimum Operating Temperature
5°C
Overall Height
278mm
Standards/Approvals
No
Country of Origin
Japan
Product details
SMC - AMJ Series Drain Separators for Vacuum
Removes water droplets from air by simply installing in vacuum equipment connection lines. Effective for removing water droplets from the air sucked into vacuum pumps and ejectors, etc.
Over 90% of droplets can be removed through the use of a special water droplet removing element. The provision of a drain cock makes it possible to discharge the drain manually after breaking the vacuum. Even when the element is saturated with water, there is almost no drop in pressure (increase in resistance). The element can be replaced with a single touch.
Stock information temporarily unavailable.
₪ 1,505.73
₪ 1,505.73 Each (ex VAT)
₪ 1,761.70
₪ 1,761.70 Each (inc. VAT)
1
₪ 1,505.73
₪ 1,505.73 Each (ex VAT)
₪ 1,761.70
₪ 1,761.70 Each (inc. VAT)
Stock information temporarily unavailable.
1
| quantity | Unit price |
|---|---|
| 1 - 4 | ₪ 1,505.73 |
| 5 - 9 | ₪ 1,468.22 |
| 10+ | ₪ 1,428.88 |
Technical documents
Specifications
Brand
SMCProduct Type
Vacuum Filter
Port Size
1/4 in
Filtration Size
3μm
Connection Thread Standard
NPT
Series
AM/AFF
Maximum Flow Rate
12000L/min
Housing Material
Die Cast Aluminium
Seal Material
Flouro Rubber
Maximum Operating Pressure
1.5 Mpa
Maximum Operating Temperature
60°C
Minimum Operating Pressure
0.1MPa
Minimum Operating Temperature
5°C
Overall Height
278mm
Standards/Approvals
No
Country of Origin
Japan
Product details
SMC - AMJ Series Drain Separators for Vacuum
Removes water droplets from air by simply installing in vacuum equipment connection lines. Effective for removing water droplets from the air sucked into vacuum pumps and ejectors, etc.
Over 90% of droplets can be removed through the use of a special water droplet removing element. The provision of a drain cock makes it possible to discharge the drain manually after breaking the vacuum. Even when the element is saturated with water, there is almost no drop in pressure (increase in resistance). The element can be replaced with a single touch.
