Microchip Battery Charger for MCP73871

RS Stock No.: 681-0875Brand: MicrochipManufacturers Part No.: MCP73871DM-VPCC
brand-logo

Technical documents

Specifications

Power Management Function

Battery Charger

Kit Classification

Evaluation Board

Featured Device

MCP73871

Product details

MCP73871 Demonstration Board

The MCP73871 Demo Board with Voltage Proportional Current Control is designed to demonstrate Microchip's stand-alone linear Li-Ion battery charger with system power path and load sharing management control.

Integrated System Load Sharing
Input Current Limit Control hardware selected (typical 1650 mA, USB-High
Three LEDs to indicate charge status, low battery and power good signal
Preset Li-Ion battery charge voltage: 4.2V ± 0.5%
Temperature monitoring (is disabled by default)
Factory preset 0.1C preconditioning current of deeply depleted cells
Factory preset Safety Timer with Timer Enable feature
Constant Current/Constant Voltage (CC/CV) charge algorithm
Resistor programmed maximum charge current: 1A
Resistor programmed termination set point: 100 mA
Automatic Charge Termination
Automatic Recharge
Internal Thermal Regulation

Battery Management, Microchip

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

₪ 237.42

Each (ex VAT)

₪ 277.78

Each (inc VAT)

Microchip Battery Charger for MCP73871

₪ 237.42

Each (ex VAT)

₪ 277.78

Each (inc VAT)

Microchip Battery Charger for MCP73871
Stock information temporarily unavailable.

Technical documents

Specifications

Power Management Function

Battery Charger

Kit Classification

Evaluation Board

Featured Device

MCP73871

Product details

MCP73871 Demonstration Board

The MCP73871 Demo Board with Voltage Proportional Current Control is designed to demonstrate Microchip's stand-alone linear Li-Ion battery charger with system power path and load sharing management control.

Integrated System Load Sharing
Input Current Limit Control hardware selected (typical 1650 mA, USB-High
Three LEDs to indicate charge status, low battery and power good signal
Preset Li-Ion battery charge voltage: 4.2V ± 0.5%
Temperature monitoring (is disabled by default)
Factory preset 0.1C preconditioning current of deeply depleted cells
Factory preset Safety Timer with Timer Enable feature
Constant Current/Constant Voltage (CC/CV) charge algorithm
Resistor programmed maximum charge current: 1A
Resistor programmed termination set point: 100 mA
Automatic Charge Termination
Automatic Recharge
Internal Thermal Regulation

Battery Management, Microchip