Technical documents
Specifications
Brand
MicrochipPhysical Network Type
100BaseTX, 10BaseT
Host Interface
Host Bus
IC Type
Controller IC
Network Interface
MDI, MDIX, MII, RMII
Communication Mode
Full Duplex, Half Duplex
Data Rate
100Mbps
Loopback Mode
Internal
Standard Supported
ANSI X3.263, IEEE 802.3, IEEE 802.3u
Mounting Type
Surface Mount
Package Type
QFN
Pin Count
64
Auto-Negotiation
Yes
DMA Support
Yes
Typical Operating Supply Voltage
3.3 V
Dimensions
9 x 9 x 0.95mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Product details
LAN9252 EtherCAT® Slave Controllers
The LAN9252 device from Microchip is a 2/3 port EtherCAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external fiber transceiver. Included is a 3 port EtherCAT® slave controller with 4K bytes of Dual Port memory (DPRAM), 4 SyncManagers, 3 Fieldbus Memory Management Units (FMMUs) and a 64-bit Distributed Clock. The LAN9252 supports 4 Process Data Interfaces - SPI/SQI, HBI and a 16 Bit Digital IO.
Features
2/3-port EtherCAT® Slave Controller with 3 Fieldbus Memory Management Units (FMMUs) and 4 SyncManagers
Interfaces with most 8/16-bit Embedded Controllers; can also interface with 32-bit Embedded Controllers with an 8/16-bit bus
Dual integrated Ethernet PHYs with HP Auto-MDIX
Cable diagnostic support
100BASE-FX support via an External Transceiver
1.8V to 3.3V variable voltage I/O
Integrated 1.2V Regulator for single 3.3V operation
Ethernet Communications - Microchip
₪ 29,331.90
₪ 112.815 Each (In a Tray of 260) (ex VAT)
₪ 34,318.32
₪ 131.994 Each (In a Tray of 260) (inc. VAT)
260
₪ 29,331.90
₪ 112.815 Each (In a Tray of 260) (ex VAT)
₪ 34,318.32
₪ 131.994 Each (In a Tray of 260) (inc. VAT)
260
Stock information temporarily unavailable.
Please check again later.
Technical documents
Specifications
Brand
MicrochipPhysical Network Type
100BaseTX, 10BaseT
Host Interface
Host Bus
IC Type
Controller IC
Network Interface
MDI, MDIX, MII, RMII
Communication Mode
Full Duplex, Half Duplex
Data Rate
100Mbps
Loopback Mode
Internal
Standard Supported
ANSI X3.263, IEEE 802.3, IEEE 802.3u
Mounting Type
Surface Mount
Package Type
QFN
Pin Count
64
Auto-Negotiation
Yes
DMA Support
Yes
Typical Operating Supply Voltage
3.3 V
Dimensions
9 x 9 x 0.95mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Product details
LAN9252 EtherCAT® Slave Controllers
The LAN9252 device from Microchip is a 2/3 port EtherCAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external fiber transceiver. Included is a 3 port EtherCAT® slave controller with 4K bytes of Dual Port memory (DPRAM), 4 SyncManagers, 3 Fieldbus Memory Management Units (FMMUs) and a 64-bit Distributed Clock. The LAN9252 supports 4 Process Data Interfaces - SPI/SQI, HBI and a 16 Bit Digital IO.
Features
2/3-port EtherCAT® Slave Controller with 3 Fieldbus Memory Management Units (FMMUs) and 4 SyncManagers
Interfaces with most 8/16-bit Embedded Controllers; can also interface with 32-bit Embedded Controllers with an 8/16-bit bus
Dual integrated Ethernet PHYs with HP Auto-MDIX
Cable diagnostic support
100BASE-FX support via an External Transceiver
1.8V to 3.3V variable voltage I/O
Integrated 1.2V Regulator for single 3.3V operation