Technical documents
Specifications
Brand
KüblerSupply Voltage
12 V dc
Count Mode
Impulses
Function
Counter
Input Type
Voltage
Connection Type
Clamp
Reset Method
No Reset
Number Of Digits
7
Mounting Type
DIN Rail
Count Direction
Up
Digit Height
4 mm
Maximum Count Frequency
10Hz
Minimum Operating Temperature
-10°C
Series
SK 07.1
Weight
55g
Maximum Operating Temperature
+60°C
Country of Origin
Germany
Product details
Two Module Wide Counter SK07
Compact adding counter for DIN rail mounting to DIN 46277
Highly shock proof - IP50 front panel
Data retention at power failure
Long life time (50 million counts)
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.
Stock information temporarily unavailable.
Please check again later.
₪ 252.76
₪ 252.76 Each (ex VAT)
₪ 295.73
₪ 295.73 Each (inc. VAT)
1
₪ 252.76
₪ 252.76 Each (ex VAT)
₪ 295.73
₪ 295.73 Each (inc. VAT)
1
Buy in bulk
quantity | Unit price |
---|---|
1 - 4 | ₪ 252.76 |
5 - 9 | ₪ 248.96 |
10+ | ₪ 247.22 |
Technical documents
Specifications
Brand
KüblerSupply Voltage
12 V dc
Count Mode
Impulses
Function
Counter
Input Type
Voltage
Connection Type
Clamp
Reset Method
No Reset
Number Of Digits
7
Mounting Type
DIN Rail
Count Direction
Up
Digit Height
4 mm
Maximum Count Frequency
10Hz
Minimum Operating Temperature
-10°C
Series
SK 07.1
Weight
55g
Maximum Operating Temperature
+60°C
Country of Origin
Germany
Product details
Two Module Wide Counter SK07
Compact adding counter for DIN rail mounting to DIN 46277
Highly shock proof - IP50 front panel
Data retention at power failure
Long life time (50 million counts)
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.