Kopex Reducer, Conduit Fitting, 32mm Nominal Size, M32 → M20, Brass
Technical documents
Specifications
Brand
KopexNominal Size
32mm
Fitting Type
Reducer
Thread Size
M32 → M20
Material
Brass
IP Rating
IP66
Series
EX/R
Country of Origin
United Kingdom
Product details
Thread Converters
A range of Kopex brass fittings which provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. These thread converters meet the latest ATEX/IECEx standards and have them clearly marked on the main body of the product, allowing them to be seen easily once installed, a key component of the new standard.,Enlargers (/E) are used where the thread size of the female side of the device is larger than the male side.,Reducers (/R) are used where the thread size of the female side of the device is smaller than the male side.,Adapters (/TC) are used where a conversion is required between thread types e.g. Metric to PG.
Approvals
ATEX Certification. BASEEFA07 ATEX 0247X, IECEx Certification. IECEx BAS07.0090X.
Kopex Ex-System
Stock information temporarily unavailable.
Please check again later.
₪ 31.366
1 Pack of 5 (ex VAT)
₪ 36.698
1 Pack of 5 (inc VAT)
1
₪ 31.366
1 Pack of 5 (ex VAT)
₪ 36.698
1 Pack of 5 (inc VAT)
1
Buy in bulk
| quantity | Unit price | Per Pack |
|---|---|---|
| 5 - 45 | ₪ 31.366 | ₪ 156.83 |
| 50 - 245 | ₪ 30.373 | ₪ 151.87 |
| 250+ | ₪ 29.282 | ₪ 146.41 |
Technical documents
Specifications
Brand
KopexNominal Size
32mm
Fitting Type
Reducer
Thread Size
M32 → M20
Material
Brass
IP Rating
IP66
Series
EX/R
Country of Origin
United Kingdom
Product details
Thread Converters
A range of Kopex brass fittings which provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. These thread converters meet the latest ATEX/IECEx standards and have them clearly marked on the main body of the product, allowing them to be seen easily once installed, a key component of the new standard.,Enlargers (/E) are used where the thread size of the female side of the device is larger than the male side.,Reducers (/R) are used where the thread size of the female side of the device is smaller than the male side.,Adapters (/TC) are used where a conversion is required between thread types e.g. Metric to PG.
Approvals
ATEX Certification. BASEEFA07 ATEX 0247X, IECEx Certification. IECEx BAS07.0090X.