Kopex Thread Converter, Conduit Fitting, 20mm Nominal Size, 3/4 in NPT → M20, Brass
Technical documents
Specifications
Brand
KopexNominal Size
20mm
Fitting Type
Thread Converter
Thread Size
3/4 in NPT → M20
Material
Brass
IP Rating
IP66
Series
EX/TC
Country of Origin
United Kingdom
Product details
Thread Converters
A range of Kopex brass fittings which provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. These thread converters meet the latest ATEX/IECEx standards and have them clearly marked on the main body of the product, allowing them to be seen easily once installed, a key component of the new standard.,Enlargers (/E) are used where the thread size of the female side of the device is larger than the male side.,Reducers (/R) are used where the thread size of the female side of the device is smaller than the male side.,Adapters (/TC) are used where a conversion is required between thread types e.g. Metric to PG.
Approvals
ATEX Certification. BASEEFA07 ATEX 0247X, IECEx Certification. IECEx BAS07.0090X.
Kopex Ex-System
Stock information temporarily unavailable.
Please check again later.
₪ 30.191
Each (In a Pack of 5) (ex VAT)
₪ 35.324
Each (In a Pack of 5) (inc VAT)
5
₪ 30.191
Each (In a Pack of 5) (ex VAT)
₪ 35.324
Each (In a Pack of 5) (inc VAT)
5
Buy in bulk
| quantity | Unit price | Per Pack |
|---|---|---|
| 5 - 45 | ₪ 30.191 | ₪ 150.96 |
| 50 - 245 | ₪ 29.199 | ₪ 145.99 |
| 250+ | ₪ 28.122 | ₪ 140.61 |
Technical documents
Specifications
Brand
KopexNominal Size
20mm
Fitting Type
Thread Converter
Thread Size
3/4 in NPT → M20
Material
Brass
IP Rating
IP66
Series
EX/TC
Country of Origin
United Kingdom
Product details
Thread Converters
A range of Kopex brass fittings which provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. These thread converters meet the latest ATEX/IECEx standards and have them clearly marked on the main body of the product, allowing them to be seen easily once installed, a key component of the new standard.,Enlargers (/E) are used where the thread size of the female side of the device is larger than the male side.,Reducers (/R) are used where the thread size of the female side of the device is smaller than the male side.,Adapters (/TC) are used where a conversion is required between thread types e.g. Metric to PG.
Approvals
ATEX Certification. BASEEFA07 ATEX 0247X, IECEx Certification. IECEx BAS07.0090X.