Technical documents
Specifications
Brand
ParallellaClassification
Computer Board
Technology
Development Board
Processor Family Name
Zynq + Epiphany III
Processor Part Number
Z-7010 + E16G301
Processor Type
MPU
Product details
Parallella-16 Desktop Computer, Epiphany III
The Parallella-16 Desktop Computer is an FPGA-based dual-core ARM Cortex-A9 single-board computer with an Epiphany III 16-core coprocessor chip. This credit card sized 'supercomputer' consumes less than 5W of power. The Parallella is a low-cost platform designed for developing and implementing high-performance applications for which parallel processing is ideally suited. Parallella boards are designed so that interconnection forming large clusters is straightforward.
Parallella Desktop Computer Board
Xilinx Zynq®-7010 All Programmable SoC (XC7Z010) with dual-core ARM Cortex-A9 CPU
Epiphany III (16-core CPU Accelerator)
1 GB DDR3 SDRAM
128 Mbit quad-SPI Flash memory
RJ45 10/100/1000 Ethernet socket
Micro HDMI port
MicroSD card slot
Micro USB 2.0 host port
Four 60-pin high-speed expansion connectors ("PEC") for FPGA signals, Epiphany links and power distribution including 24 GPIO ports
Power supply: +5 V @ 2 A via 2.1 mm centre-positive barrel socket
Typical power consumption: less than 5 W
Dimensions: 3.4 x 2.1 in
Suitable power supply unit (not included): RS Part No. 706-6502
Epiphany III Coprocessor
16 x high-performance 32-bit RISC CPU cores
Max operating frequency: 1 GHz (600 MHz on Parallella board)
Peak performance @ 1 GHz: 32 GFLOPS
On-chip distributed shared SRAM: 512 kB (32 kB/core)
Local memory bandwidth: 512 GB/s
Network on-chip Bisection bandwidth: 64 GB/s
Off-chip bandwidth: 8 GB/s
Maximum chip power consumption: 2 W
IEEE-754 floating-point instruction set
Fully featured ANSI-C/C++ programmable
GNU/Eclipse based tool chain
Source-synchronous LVDS off-chip links for host or direct chip-to-chip interfacing
Supplied with
Heatsink
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical documents
Specifications
Brand
ParallellaClassification
Computer Board
Technology
Development Board
Processor Family Name
Zynq + Epiphany III
Processor Part Number
Z-7010 + E16G301
Processor Type
MPU
Product details
Parallella-16 Desktop Computer, Epiphany III
The Parallella-16 Desktop Computer is an FPGA-based dual-core ARM Cortex-A9 single-board computer with an Epiphany III 16-core coprocessor chip. This credit card sized 'supercomputer' consumes less than 5W of power. The Parallella is a low-cost platform designed for developing and implementing high-performance applications for which parallel processing is ideally suited. Parallella boards are designed so that interconnection forming large clusters is straightforward.
Parallella Desktop Computer Board
Xilinx Zynq®-7010 All Programmable SoC (XC7Z010) with dual-core ARM Cortex-A9 CPU
Epiphany III (16-core CPU Accelerator)
1 GB DDR3 SDRAM
128 Mbit quad-SPI Flash memory
RJ45 10/100/1000 Ethernet socket
Micro HDMI port
MicroSD card slot
Micro USB 2.0 host port
Four 60-pin high-speed expansion connectors ("PEC") for FPGA signals, Epiphany links and power distribution including 24 GPIO ports
Power supply: +5 V @ 2 A via 2.1 mm centre-positive barrel socket
Typical power consumption: less than 5 W
Dimensions: 3.4 x 2.1 in
Suitable power supply unit (not included): RS Part No. 706-6502
Epiphany III Coprocessor
16 x high-performance 32-bit RISC CPU cores
Max operating frequency: 1 GHz (600 MHz on Parallella board)
Peak performance @ 1 GHz: 32 GFLOPS
On-chip distributed shared SRAM: 512 kB (32 kB/core)
Local memory bandwidth: 512 GB/s
Network on-chip Bisection bandwidth: 64 GB/s
Off-chip bandwidth: 8 GB/s
Maximum chip power consumption: 2 W
IEEE-754 floating-point instruction set
Fully featured ANSI-C/C++ programmable
GNU/Eclipse based tool chain
Source-synchronous LVDS off-chip links for host or direct chip-to-chip interfacing
Supplied with
Heatsink