KYOCERA AVX 10μF Tantalum Capacitor 50V dc, TAP Series

RS Stock No.: 134-9405Brand: KYOCERA AVXManufacturers Part No.: TAP106K050SCS

Technical documents

Product details

RS Multipower LED Driver MP 80 Slim HV Series

The MP 80 Slim HV is a direct current electronic driver, multi-current, for powering LEDs and LED modules. This multi-power LED driver is supplied with dip-switch, for the selection of the output current. The MP 80 Slim HV is a high performance, low cost driver, designed for LED lighting solutions not requiring dimming. This power supply delivers high power, with active PFC, flexible selection of the output current and lower costs compared to a dimmable solution.

Driver for built-in use
Multi-power driver with dip-switch
It can be used for lighting equipment in protection class I and II
Active power factor corrector
Protected against overheating, short circuits, mains voltage spikes and overloads

Approvals

EN 50172 (VDE 0108)
EN 55015
EN 61000-3-2
EN 61000-3-3
EN 61347-1
EN 61347-2-13
EN 61547
EN 62384

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

₪ 17.102

Each (In a Bag of 500) (ex VAT)

₪ 20.009

Each (In a Bag of 500) (inc VAT)

KYOCERA AVX 10μF Tantalum Capacitor 50V dc, TAP Series

₪ 17.102

Each (In a Bag of 500) (ex VAT)

₪ 20.009

Each (In a Bag of 500) (inc VAT)

KYOCERA AVX 10μF Tantalum Capacitor 50V dc, TAP Series
Stock information temporarily unavailable.

Buy in bulk

quantityUnit pricePer Bag
500 - 1000₪ 17.102₪ 8,551.22
1500+₪ 16.487₪ 8,243.57

Technical documents

Product details

RS Multipower LED Driver MP 80 Slim HV Series

The MP 80 Slim HV is a direct current electronic driver, multi-current, for powering LEDs and LED modules. This multi-power LED driver is supplied with dip-switch, for the selection of the output current. The MP 80 Slim HV is a high performance, low cost driver, designed for LED lighting solutions not requiring dimming. This power supply delivers high power, with active PFC, flexible selection of the output current and lower costs compared to a dimmable solution.

Driver for built-in use
Multi-power driver with dip-switch
It can be used for lighting equipment in protection class I and II
Active power factor corrector
Protected against overheating, short circuits, mains voltage spikes and overloads

Approvals

EN 50172 (VDE 0108)
EN 55015
EN 61000-3-2
EN 61000-3-3
EN 61347-1
EN 61347-2-13
EN 61547
EN 62384