Assemtech SPST Reed Switch

RS Stock No.: 909-2819Brand: AssemtechManufacturers Part No.: GC1513-Kit
brand-logo
View all in Reed Switches

Technical documents

Specifications

Contact Configuration

SPST

Contact Resistance

100mΩ

Contact Material

Rhodium

AT Value Range

30-40 / 45-60 / 60-70AT

Width

5.4 (Dia.)mm

Length

52mm

Dimensions

5.4 (Dia.) x 52mm

Country of Origin

Belgium

Product details

Form A & C Reed Switch Kits

These kits have been specially brought together for the design stage. Each kit has a selection of sensitivity levels from the required series allowing you to test which is best for your application. This eliminates the need to purchase packs of each sensitivity helping to reduce waste and cost.

They are hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.

Features

Hermetically sealed
Form A (SPNO) or form C (SPCO) ruthenium or rhodium plated contacts
Mechanical Life 10⁸ Operations
For suitable magnets, see stk. no 362-2401 typically

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

₪ 35.27

1 Kit (ex VAT)

₪ 41.27

1 Kit (inc. VAT)

Assemtech SPST Reed Switch

₪ 35.27

1 Kit (ex VAT)

₪ 41.27

1 Kit (inc. VAT)

Assemtech SPST Reed Switch
Stock information temporarily unavailable.

Technical documents

Specifications

Contact Configuration

SPST

Contact Resistance

100mΩ

Contact Material

Rhodium

AT Value Range

30-40 / 45-60 / 60-70AT

Width

5.4 (Dia.)mm

Length

52mm

Dimensions

5.4 (Dia.) x 52mm

Country of Origin

Belgium

Product details

Form A & C Reed Switch Kits

These kits have been specially brought together for the design stage. Each kit has a selection of sensitivity levels from the required series allowing you to test which is best for your application. This eliminates the need to purchase packs of each sensitivity helping to reduce waste and cost.

They are hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.

Features

Hermetically sealed
Form A (SPNO) or form C (SPCO) ruthenium or rhodium plated contacts
Mechanical Life 10⁸ Operations
For suitable magnets, see stk. no 362-2401 typically