Take Up Bearing Unit, ST50, 50mm ID

RS Stock No.: 243-5644Brand: NSK-RHPManufacturers Part No.: ST50
brand-logo
View all in Bearing Units

Technical documents

Specifications

Brand

NSK-RHP

Inside Diameter

50mm

Bearing Unit Type

Take Up Bearing Unit

Material

Cast Iron

Length

151mm

Width

118mm

Depth

49.5mm

Product details

Self Lube Bearing Take-Up Unit

Take-up units are used to “take up” the slackness in conveyor belts. A nut is inserted into the slot and a bolt through the casting to adjust the belt tension.

Made from cast iron to BS1452
Spherical bearing insert accommodates initial misalignment
Nitrile/fabric seals

Supplied with

grease nipples

Bearing Take-Up Units

Take-up units are often used where shaft or belt adjustment/tightening is required, and are often seen installed within conveyor systems. The units may also be installed within food processing environments and used for agricultural equipment applications.

Stock information temporarily unavailable.

₪ 377.97

₪ 377.97 Each (ex VAT)

₪ 442.22

₪ 442.22 Each (inc. VAT)

Take Up Bearing Unit, ST50, 50mm ID

1

Available in multiples of 1
1₪ 377.97
2₪ 755.94
3₪ 1,133.91
4₪ 1,511.88
5₪ 1,847.32
6₪ 2,216.79
7₪ 2,586.26
8₪ 2,955.72
9₪ 3,325.18
10₪ 3,674.40
11₪ 4,041.84
12₪ 4,409.28
13₪ 4,776.72
14₪ 5,144.16
15₪ 5,511.60

₪ 377.97

₪ 377.97 Each (ex VAT)

₪ 442.22

₪ 442.22 Each (inc. VAT)

Take Up Bearing Unit, ST50, 50mm ID
Stock information temporarily unavailable.

1

Available in multiples of 1
1₪ 377.97
2₪ 755.94
3₪ 1,133.91
4₪ 1,511.88
5₪ 1,847.32
6₪ 2,216.79
7₪ 2,586.26
8₪ 2,955.72
9₪ 3,325.18
10₪ 3,674.40
11₪ 4,041.84
12₪ 4,409.28
13₪ 4,776.72
14₪ 5,144.16
15₪ 5,511.60

Stock information temporarily unavailable.

Please check again later.

quantityUnit price
1 - 4₪ 377.97
5 - 9₪ 369.46
10+₪ 367.44

Technical documents

Specifications

Brand

NSK-RHP

Inside Diameter

50mm

Bearing Unit Type

Take Up Bearing Unit

Material

Cast Iron

Length

151mm

Width

118mm

Depth

49.5mm

Product details

Self Lube Bearing Take-Up Unit

Take-up units are used to “take up” the slackness in conveyor belts. A nut is inserted into the slot and a bolt through the casting to adjust the belt tension.

Made from cast iron to BS1452
Spherical bearing insert accommodates initial misalignment
Nitrile/fabric seals

Supplied with

grease nipples

Bearing Take-Up Units

Take-up units are often used where shaft or belt adjustment/tightening is required, and are often seen installed within conveyor systems. The units may also be installed within food processing environments and used for agricultural equipment applications.