Technical documents
Specifications
Number of LIN Channels
0
Number of PCI Channels
0
Number of Ethernet Channels
1
Maximum Number of Ethernet Channels
1
Number of CAN Channels
2
Number of UART Channels
2
Number of I2C Channels
3
Number of ADC Units
3
Number of SPI Channels
3
Number of USART Channels
4
USB Channels
2
Data Bus Width
32bit
Program Memory Size
1.024 MB
Program Memory Type
Flash
Instruction Set Architecture
DSP
Minimum Operating Temperature
-40 °C
External Length
2032 mm
Maximum Operating Temperature
+85 °C
Mounting Type
Surface Mount
Device Core
ARM Cortex M4
Pin Count
176
Maximum Frequency
168MHz
RAM Size
256 kB
Height
1.45mm
ADCs
24 x 12 bit
Pulse Width Modulation
2 (16 bit)
Minimum Wire Size (mm²)
6.6mm²
Typical Operating Supply Voltage
3.6 V
Width
24.1mm
Length
24.1mm
Package Type
LQFP
Brand
STMicroelectronicsDimensions
24.1 x 24.1 x 1.45mm
Product details
Thermal protection relay for series LT3 S motors
Protection relay with probe, LT3 series, that permanently controls the temperature of machines that require protection (motors, alternators etc..). Operates via CTP thermistor probes.
Automatic or manual reset.
Faults displayed on the front panel of the device or remotely, except for version LT3 SE, which does not have this function.
Fault detection if the probe circuit is accidentally cut off
Three versions are available:
LT3 SE: Control devices with no fault memory.
LT3 SA: Automatic reset with thermistor short circuit detection device.
Warning light on front panel.
LT3 SM: Device with manual reset and thermistor short circuit detection.
On the front panel there is a fault warning light and voltage indicator, and a test and reset button.
Standards
IEC 60034-11, VDE 0660
Stock information temporarily unavailable.
Please check again later.
₪ 61.278
Each (Supplied in a Tray) (ex VAT)
₪ 71.695
Each (Supplied in a Tray) (inc VAT)
40
₪ 61.278
Each (Supplied in a Tray) (ex VAT)
₪ 71.695
Each (Supplied in a Tray) (inc VAT)
40
Technical documents
Specifications
Number of LIN Channels
0
Number of PCI Channels
0
Number of Ethernet Channels
1
Maximum Number of Ethernet Channels
1
Number of CAN Channels
2
Number of UART Channels
2
Number of I2C Channels
3
Number of ADC Units
3
Number of SPI Channels
3
Number of USART Channels
4
USB Channels
2
Data Bus Width
32bit
Program Memory Size
1.024 MB
Program Memory Type
Flash
Instruction Set Architecture
DSP
Minimum Operating Temperature
-40 °C
External Length
2032 mm
Maximum Operating Temperature
+85 °C
Mounting Type
Surface Mount
Device Core
ARM Cortex M4
Pin Count
176
Maximum Frequency
168MHz
RAM Size
256 kB
Height
1.45mm
ADCs
24 x 12 bit
Pulse Width Modulation
2 (16 bit)
Minimum Wire Size (mm²)
6.6mm²
Typical Operating Supply Voltage
3.6 V
Width
24.1mm
Length
24.1mm
Package Type
LQFP
Brand
STMicroelectronicsDimensions
24.1 x 24.1 x 1.45mm
Product details
Thermal protection relay for series LT3 S motors
Protection relay with probe, LT3 series, that permanently controls the temperature of machines that require protection (motors, alternators etc..). Operates via CTP thermistor probes.
Automatic or manual reset.
Faults displayed on the front panel of the device or remotely, except for version LT3 SE, which does not have this function.
Fault detection if the probe circuit is accidentally cut off
Three versions are available:
LT3 SE: Control devices with no fault memory.
LT3 SA: Automatic reset with thermistor short circuit detection device.
Warning light on front panel.
LT3 SM: Device with manual reset and thermistor short circuit detection.
On the front panel there is a fault warning light and voltage indicator, and a test and reset button.
Standards
IEC 60034-11, VDE 0660