Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.
Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.
Pneumatic systems contain many components, pneumatic pressure regulator function fittings being one example.
Pneumatic pressure regulator function fittings are used to ensure the pressure in the system stays within the desired range. If the pressure gets too high or too low the fittings are activated and the flow is adjusted to prevent an over or under pressure.
Pneumatic pressure regulator function fittings come in a variety of diameters, fits, grades and pressure ranges.
(Price shown excludes VAT)
|Part Details||Brand||Manufacturer Series||Threaded Inlet Port||Tube Outlet Port||Threaded Inlet Port Size|
Legris 7300 Threaded Tube Miniature Regulator, G 1/4 Male x 8mm, 1/4 in
||Legris||7300||G 1/4 Male||8mm||1/4 in|
Legris 7300 Threaded Tube Miniature Regulator, G 1/8 Male x 4mm, 1/8 in
||Legris||7300||G 1/8 Male||4mm||1/8 in|
Legris 7300 Threaded Tube Miniature Regulator, G 1/8 Male x 6mm, 1/8 in
||Legris||7300||G 1/8 Male||6mm||1/8 in|
Eliwell 016H Threaded Pressure Switch, G 1/4 Male, 1/4 in
||Eliwell||016H||G 1/4 Male||-||1/4 in|
Legris 7300 Threaded Tube Miniature Regulator, G 1/4 Male x 6mm, 1/4 in
||Legris||7300||G 1/4 Male||6mm||1/4 in|
Legris 7300 Threaded Tube Miniature Regulator, G 1/8 Male x 8mm, 1/8 in
||Legris||7300||G 1/8 Male||8mm||1/8 in|