Technical documents
Specifications
Brand
Schneider ElectricType
Linear
Electrical Phase
1, 2
AC or DC Input Voltage
ac
Number of Outputs
1
Input Voltage
207 → 253V ac
AC or DC Output Voltage
dc
Output Voltage
24V dc
Output Current
6A
Power Rating
144W
Height
153mm
Depth
153mm
Mounting Type
DIN Rail Mount
Minimum Temperature
-20°C
Ripple And Noise
1200mV
Maximum Temperature
+60°C
Country of Origin
Czech Republic
Product details
ABL 8FEQ filtered, rectified power supplies
Filtered, rectified power supplies are built using a security transformer equipped with a bridge rectifier and filter capacitors.
With no regulation, rectified power supplies provide a non-regulated voltage sensitive to variations in line supply and load. They can only be used on good quality line supplies where fluctuations are limited to -10 %… + 10 % of the nominal value.
These supplies are connected between phase and neutral or between two phases, filtered and rectified. They are designed for direct mounting on a DIN rail.
Stock information temporarily unavailable.
Please check again later.
₪ 1,191.38
Each (ex VAT)
₪ 1,393.91
Each (inc. VAT)
1
₪ 1,191.38
Each (ex VAT)
₪ 1,393.91
Each (inc. VAT)
1
Technical documents
Specifications
Brand
Schneider ElectricType
Linear
Electrical Phase
1, 2
AC or DC Input Voltage
ac
Number of Outputs
1
Input Voltage
207 → 253V ac
AC or DC Output Voltage
dc
Output Voltage
24V dc
Output Current
6A
Power Rating
144W
Height
153mm
Depth
153mm
Mounting Type
DIN Rail Mount
Minimum Temperature
-20°C
Ripple And Noise
1200mV
Maximum Temperature
+60°C
Country of Origin
Czech Republic
Product details
ABL 8FEQ filtered, rectified power supplies
Filtered, rectified power supplies are built using a security transformer equipped with a bridge rectifier and filter capacitors.
With no regulation, rectified power supplies provide a non-regulated voltage sensitive to variations in line supply and load. They can only be used on good quality line supplies where fluctuations are limited to -10 %… + 10 % of the nominal value.
These supplies are connected between phase and neutral or between two phases, filtered and rectified. They are designed for direct mounting on a DIN rail.