TE Connectivity Blue PVDF Solder Sleeve 36.8mm Length 2.41 → 4.32mm Cable Diameter

RS Stock No.: 136-2094Brand: TE ConnectivityManufacturers Part No.: D-110-0101
brand-logo
View all in Solder Sleeves

Technical documents

Specifications

Minimum Cable Diameter

2.4mm

Maximum Cable Diameter

4mm

Sleeve Length

36.8mm

Material

PVDF

Minimum Operating Temperature

+125°C

Maximum Operating Temperature

+150°C

Quantity

500

Colour

Blue

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Series

D-110

PRICED TO CLEAR

Yes

Country of Origin

Mexico

Product details

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

₪ 4,588.57

1 Box of 500 (ex VAT)

₪ 5,368.63

1 Box of 500 (inc VAT)

TE Connectivity Blue PVDF Solder Sleeve 36.8mm Length 2.41 → 4.32mm Cable Diameter

₪ 4,588.57

1 Box of 500 (ex VAT)

₪ 5,368.63

1 Box of 500 (inc VAT)

TE Connectivity Blue PVDF Solder Sleeve 36.8mm Length 2.41 → 4.32mm Cable Diameter
Stock information temporarily unavailable.

Technical documents

Specifications

Minimum Cable Diameter

2.4mm

Maximum Cable Diameter

4mm

Sleeve Length

36.8mm

Material

PVDF

Minimum Operating Temperature

+125°C

Maximum Operating Temperature

+150°C

Quantity

500

Colour

Blue

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Series

D-110

PRICED TO CLEAR

Yes

Country of Origin

Mexico

Product details

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.